naxcollector.blogg.se

Lockout on conventional data channels 203.56 KB

TK-880-V1-Only - E4B3 Use only in Version 1 Radios CURRENT.Kenwood programming software reference for the TK-880 Recommended Software: KPG-49D Version 4 For the European version of the K-880 you will instead use the KPG-60D DOS software with the same KPG-46 cable.The KPG-49D Version 2.(any number) and 3.(any number) are DOS based, while version 4.(any number) are Windows based and much easier to use. Re-align the radio for optimum performance on 70cm. It is said that most Kenwood 450-490 radios will go to about 442-443 mhz, but the VCO can easily be adjusted to go lower. The 70cm amateur radio band is the 420 to 450 MHz portion of the UHF radio spectrum. The TK-880 will program below 450 MHz, but the receive sensitivity is reduced. The cable is serial on one end and RJ45 on the other. The last released KPG-49D software runs under Windows. The KPG-49D software can program all radios in the TK-X80 series. programming You need the KPG-49D programming software and an appropriate cable.TK-880H is 10W on low power and 45W on high power.TK-880 is 5W on low power and 25W on high power.Wide or narrow bandwidth frequencies Of the various revisions the two main models:.Max 250 channels capacity (conventional mode).